Shenzhen FU JIN TAI TECHNOLOGY CO.,LIMITED

NEWS CENTER

Home page

NEWS

2020

JUKI Long Board SMT Placement Machine JX-350

Author:

JUKI Long Board SMT Placement Machine JX-350

JUKI Long Board SMT Placement Machine JX-350

Expanded versatility for LED production and more!
JX-350 is now available with faster placement speed and improved placing ability

Features

Chip

32,000CPH chip (Laser centering / Optimum)

21,000CPH chip (Laser centering / IPC9850)

1. From 0603 to □33.5mmsquare components

2. JUKI laser centering for high speed, high accuracy placement

3. Improved placement quality

4. Alternate pick by screw-type nozzles* achieves high-speed placement for large component up to 25 mm diameter.

5. High-precision placement of diffusion lenses

6. Capable of up to 1,500 mm long board production, top class board size in industry.*

7. Various supply methods *

Features of the Laser Centering

JUKI’s original technology supports the high accuracy and high repeatability required for high density placement.

High accuracy, high-speed mounting

High-speed, on-the-fly centering

A high resolution laser is mounted on the head to center components in all directions including angle. Centering is done on-the-fly, allowing high speed placement of components from small chips to SOPs.

Adaptable centering

Centering accommodates component variations

Laser centering measures the components on the side. It is not affected by variations of component color or width/length so, unlike vision centering, there is no need to edit component data for different component vendors.

Component check function improves placement reliability

Since the laser is mounted on the head, it can be used to monitor the presence of components the entire time from pick to placement. This is difficult to accomplish with vacuum detection only. The placement reliability is also improved because the release of the component is confirmed after placement.

Specification

Board size	1time clamping	650mm×360mm
	2times clamping	1,200mm×360mm
	3times clamping *	1,500mm×360mm
Component height			6mm / 12mm
Component size			0603(0201) ~ □33.5mm
Placement speed (chip)	Optimum	32,000CPH
	IPC9850	21,000CPH
Placement accuracy			±0.05mm（Cpk≧1）
Feeder inputs	Front-side fixed mechanical feeder bank(Standard)	Max.40 in case of 8mm tape
	Front+rear-side fixed mechanical feeder bank *1	Max.80
	Front+rear-side fixed electrical feeder bank *1	Max.160 *2