CONTACT
MESSAGE
FUJINTAI TECHNOLOGY CO.,LIMITED
Tel:+86-755-27392455
Fax:+86-755-27399893
E-mail: david@fujintai.com
Website: www.fujintai.com
2F Building C Feiteng Industrial No.8 Huanzhen Road
Shajing 518104 , Shenzhen .China
Copyright ©Shenzhen FU JIN TAI TECHNOLOGY CO.,LIMITED
NEWS
标题
JUKI High-Speed Compact Modular Mounter RX-7R
JUKI High-Speed Compact Modular Mounter RX-7R
Innovative Production Efficiency Improvement for the Whole Factory
Features
Linking to other machines for improved productivity
Graphical system visualization
JaNets Integraton
New P16S head with improved accuracy
Simultaneous production of PCBs
Top and Bottom Check of Leaded Parts
Low impact placement force
High speed of maximum cluster tact 75,000 CPH
Compact Design – 998mm width
Wide Component Range
Specification
High -Speed Compact Modular Mounter RX-7R |
||||
|
(P16S×P16S head) |
(P16S×P8*1 head) |
(P8×P8*1 head) |
|
Board |
Single lane conveyer |
50×50~510mm*2*3×450mm |
||
Single lane conveyer |
50×50~510mm*2*3×450mm |
|||
Single lane conveyer |
50×50~510mm*2*3×250mm |
|||
Component height |
3mm |
3mm(P16S head) |
10.5mm |
|
10.5mm(P8 head) |
||||
Component size |
03015*4~□5mm |
03015*4~□5mm |
0603~□25mm |
|
0603~□25mm |
||||
Placement speed |
Chip |
75,000 CPH |
54,900 CPH |
34,800 CPH |
IC |
– |
6,400 CPH*3 |
12,800 CPH |
|
Placement |
Chip |
±0.04mm(Cpk≧1) |
||
IC |
– |
±0.04mm |
||
Feeder capacity |
Up to 56*6 |
|||
Power supply |
3 phase AC200V、220V-430V*7 |
|||
Apparent power |
2.3kVA |
|||
Operating air pressure |
0.5±0.05MPa |
|||
Air consumption (standard) |
20L/分ANR(during normal operation) |
|||
Machine dimensions (W x D x H)*9 |
998×1,895×1,530mm |
998×1,895×1,530mm*8 |
||
Mass (approximately) |
about 1,820kg*10 |
*1 Contact sales for more details
*2 The BOC, BAD mark, and 2D code can be recognized when the board size X-axis is between 50 mm and 350 mm.
*3 In long board mode.(Two PCBs up to 420mm can be produced simultaneously)
*4 Contact sales for details
*5 Using P8 head
*6 Using RF04AS or RF08AS feeders
*7 Optional transformer required for 220V – 430V
*8 P8 head requires 123mm additional space on the front for the feeder bank
*9 Display and signal light not included
*10 Using P16S x P16S head configuration, dual lane with trolleys