Search

CONTACT

MESSAGE

FUJINTAI TECHNOLOGY CO.,LIMITED

Tel:+86-755-27392455
Fax:+86-755-27399893
E-mail: 
david@fujintai.com
Website:  www.fujintai.com

2F Building C Feiteng Industrial No.8 Huanzhen Road 
Shajing 518104 , Shenzhen .China 

Copyright ©Shenzhen FU JIN TAI TECHNOLOGY CO.,LIMITED

粤ICP备18142750号-1       Powered by 300.cn

NEWS

>
>
>
Panasonic NPM D3A Pick and Place Machine Equipment

标题

Panasonic NPM D3A Pick and Place Machine Equipment

Page view

Panasonic NPM D3A Pick and Place Machine Equipment

The compact dual-beam NPM-D3A offers a reinforced frame, advanced head, and award-winning Multi Recognition Camera improve placement accuracy down to 30um, and capable achieving a maximum CPH of 92,000
Flexible board handling system converts to support single- and multiple dual-lane operation modes
Compact footprint and dual-side operation maximizes factory floor space utilization and scalability
Integrates the industry’s only field-scalable Multi Recognition Camera that combines alignment, thickness, and 3D coplanarity into one time-saving, process-improving step
Applications:
The NPM-D3 is an industry standard building block in high-speed, high volume applications ranging from automotive to industrial to medical. In fact, the vast majority of automotive EMS providers choose Panasonic solutions.
Features
New Lightweight 16NH Version 3 - faster, more accurate
Continuous(Sinusoidal) Motion over upward looking camera scanning
Stiffer structure and anti-vibration enhancements - accuracy improvements
High-efficiency pick routine for small part processing
First year free of charge use of labor & time saving features
Dynamic M2M process & diagnostic control
Compatible with CM- & AM-series intelligent feeders & nozzles
Feeder carts compatible with NPM TT2 and NPM X-series platforms

Model ID

NPM-D3A

PCB dimensions(mm) *1

Dual-lane mode

L 50 × W50 ~ L 510 × W 300

Single-lane mode

L 50 × W50 ~ L 510 × W 590

PCB exchange time

Dual-lane mode

0s* *No 0s when cycle time is 3.6 s or less

Single-lane mode

3.6s* *When selecting short conveyors.

Electric source

3-phase AC 200, 220, 380, 400, 420, 480 V 2.7 kVA

Pneumatic source *2

0.5 MPa, 100 L /min (A.N.R.)

Dimensions (mm) *2

W 832 × D 2 652 *3 × H 1 444 *4

Mass

1 680 kg (Only for main body : This differs depending on the option configuration.)