22

2020

-

10

SMT mounter FUJI NXT III

Author:


SMT mounter FUJI NXT III

SMT mounter FUJI NXT III

NXT III is a modular SMT mounter that is able to provide the best line every time for factories that have such kinds of frequent changes for producing electronics devices.

Full modularization and unitization

Configure lines according to the purpose

Modules, heads, and supply units can be combined freely, so that the optimum line configuration can always be built by changing the configuration to match changes in the part type and product model.

It is possible to expand the capability only for the necessary level by adding modules and exchanging units.

Offline maintenance to maximize production uptime

Because swapping units that require maintenance with units that are fully maintained can be performed at the operator level, downtime can also be greatly reduced. Maintenance can be performed offline on the removed units while production is still running.

The machines are designed to reduce operator work load

The module can be pulled forward for easy access inside the machine from both sides. Working at the machine can be performed in a safe and comfortable posture.

ID management

Heads, nozzles, and feeders are all managed by ID.

Detailed production data for materials and equipment is stored in the database, to be used for line management, maintenance management, and traceability.

Automatic calibration

The operator simply pushes the START button after exchanging the head. Heads are calibrated automatically in the machine so that production can resume.

Compact lightweight heads

Heads can be exchanged easily

Heads can be exchanged easily without tools.

The heads are lightweight and thus can be removed easily by a machine operator when needing to perform maintenance or troubleshooting when responding to issues.

High speed and high accuracy

Having compact and lightweight heads reduced the load on the machine. As a result, the modules themselves are able to be compact while maintaining high speed and high accuracy.

Single-side operation

Only a short distance is traveled for part supply and changeover, for a simple work path that does not take excessive time or effort.
Production lines can be configured freely into layouts such as back to back or U-shaped lines.

43,000 cph high-speed placement

The speed of operations frequently used in actual production have been increased intensively, improving the actual throughput by 6% on average. (Fuji internal investigation)
This module is effective for module part boards, smartphone boards, and other such panels which have a high part density.

Realtime load control

As parts continue to become even smaller, thinner, and lighter the demand for low-impact placement, in addition to placement accuracy, is also increasing. The combination of the H12L head with the M6 IIIL module makes it possible to control the load during placement in real time. This means that parts can always be placed using the same load regardless of the condition of the panel, preventing damage to parts.

SMT,mounter,FUJI,NXT,III

undefined

undefined